Hydraulic UN-7001LC
โพสต์เมื่อ : 1 ธ.ค 2564 เวลา 14:10 น.
| Model | UN-7001-LC200 | UN-7001-LC100 | UN-7001-LC50 | UN-7001-LC30 | UN-7001-LC20 | UN-7001-LC10 | ||
| Capacity | 200tf | 100tf | 50tf | 30tf | 20tf | 10tf | ||
| Speed(mm/min)(without loading) | 1~65 | 1~70 | 1~70 | 1~90 | 1~90 | 1~90 | ||
| Display Method | By Computer | |||||||
| Load Range | Rangeless(full scales at the same amplification) | |||||||
| Load Resolution | 1/500000 | |||||||
| Accuracy | 小於±1% | |||||||
| Driving Method | Hydraulic System | |||||||
| Tensile | Max.Space(1) | 620 | 620 | 600 | 540 | 540 | 540 | |
| Grips for Rod(rod dia.) | 12~85 | 13~75 | 12~50 | 10~40 | 10~40 | 10~40 | ||
| Grips for Plate | 85x110 | 70x90 | 50x80 | 40x60 | 40x60 | 40x60 | ||
| Compression | Effective Space(2) | 850 | 740 | 700 | 640 | 640 | 640 | |
| Diameter of | 200 | 160 | 120 | 100 | 100 | 100 | ||
| Compression | ||||||||
| Plate | ||||||||
| Transverse | Effective Space(3) | 330 | 330 | 450 | 380 | 380 | 380 | |
| Bending jig | Max.Space | 790 | 340 | 390 | 390 | 390 | 390 | |
| between two | ||||||||
| fulcrums | ||||||||
| Fulcrum Size | 30x210 | 30x145 | 30x145 | 30x145 | 30x145 | 30x145 | ||
| (dia×width) | ||||||||
| Radius of | R35 | R22 | R22 | R16 | R16 | R16 | ||
| Punch | Punch | |||||||
| Punch | 200 | 160 | 120 | 100 | 100 | 100 | ||
| Width | ||||||||
| Ram Stroke | 230 | 220 | 220 | 200 | 200 | 200 | ||
| Number of pillars | 6 | 6 | 6 | 6 | 6 | 6 | ||
| Effective Space Between two Columns | 630 | 450 | 450 | 410 | 410 | 410 | ||
| Crosshead drive system | Hydraulic based | |||||||
| Crosshead Speed(Up/Down) | 300+/-10% | |||||||
| Dimension(W×D×H) | Main Unit(mm) | 1320X1080X3150 | 1060X830X2500 | 950X750X2150 | 850X660X1950 | 850X660X1950 | 850X660X1950 | |
| Control Uni(mm)t | 1270X760X990 | 1270X760X990 | 1270X760X990 | 1270X760X990 | 1270X760X990 | 1270X760X990 | ||
| Standard accessories | Plate and rod grips | |||||||
| Optional accessories | Bending jig , Compression platens | |||||||
